PREMIUM TOP TREATMENTS SPECIFICATIONS & OPTIONS
HOW TO MEASURE
MEASURING/MOUNTING NOTES
-
Offered in outside mount only, “L” brackets are included.
RETURN SIZES
-
From 2” – 9” ordered in ½” increments.
AVAILABLE FABRICS
-
Available in all L3 fabrics except sheers.
WELTING
-
Offered with ¼” welt at top.

L3-SP34

L3-SP04
WIDTH
-
From 24” minimum to 100” maximum.
LENGTH
-
Edge swoop length at approximately 12”.
-
Center swoop length at approximately 15”.
-
Kerchief length at approximately 22”.
-
2 swoops.
SWOOP COUNT
-
Only offered in outside mount, “L” brackets are included.
-
Offered in outside mount only.
MEASURING/MOUNTING NOTES
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
AVAILABLE FABRICS
-
Available in all L3 fabrics except sheers.
LINING
-
Privacy lining is standard.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
WELTING
-
Offered with ¼” welt at top.
NOTE: ¼” SELF WELTING IS OFFERED ON ALL BOARD MOUNTED VALANCES AT THE TOP
-
Mitered corners are offered as an option, factory will require drawing with exact angle and measurement.
MITERS
-
Offered with ¼” welt at top.
WELTING
-
Decorative trims are offered as an option for bottom edge only.
DECORATIVE TRIM
-
Privacy lining is standard.
LINING
AVAILABLE FABRICS
-
Available in all L3 fabrics except sheers.
RETURN SIZES
-
From 2” – 9” ordered in ½” increments.
MEASURING/MOUNTING NOTES
-
Offered in outside mount only, “L” brackets are included.
-
Available in 3 lengths: 10”, 14” and 18”.
LENGTH
-
Maximum: 192”
-
From 24” minimum to 192” maximum.
WIDTH

L3-SP05

L3-SP07
WIDTH
-
Maximum: 192”
-
From 24” minimum to 192” maximum.
HEIGHTS
-
Available in 2 lengths: 14” and 18”.
-
Offered in outside mount only, “L” brackets are included.
MEASURING/MOUNTING NOTES
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
-
Available in all L3 fabrics except sheers.
AVAILABLE FABRICS
LINING
-
Privacy lining is standard.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
WELTING
-
Offered with ¼” welt at top.
TIES
-
2 ties are included.

L3-SP09

L3-SP13
L3-SP14

-
Decorative trims are offered as an option for bottom edge only.
DECORATIVE TRIM
-
Swags are lined with privacy lining only.
-
Jabots are always self-lined, Dual lining and Interlining are offered as an option.
LINING
-
Available in all L3 fabrics except sheers.
AVAILABLE FABRICS
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
MEASURING/MOUNTING NOTES
-
Only offered in outside mount, “L” brackets are included.
SWAG COUNT
-
Swag sizes: Center swag at approximately 18”, short point at approximately 12”
-
Jabot length at approximately 36”, custom height from 37” up to 108” as an option.
HEIGHTS
-
From 24” minimum to 192” maximum.
WIDTH
WELTING
-
Offered with ¼” welt at top.
-
Offered with ¼” welt at top.
WELTING
-
Decorative trims are offered as an option for bottom edge only.
DECORATIVE TRIM
-
Center part will be lined with privacy lining.
-
Jabots will be self-lined.
-
Dual lining and interlining are optional.
LINING
AVAILABLE FABRICS
-
Available in all L3 fabrics except sheers.
RETURN SIZES
-
From 2” – 9” ordered in ½” increments.
MEASURING/MOUNTING NOTES
-
Offered in outside mount only, “L” brackets are included.
-
Center will measure 15”, jabots will measure 20”.
-
Center will measure 10”, jabots will measure 15”.
LENGTH
-
From 24” minimum to 192” maximum.
WIDTH

L3-SP21
-
Offered with ¼” welt at top.
WELTING
WIDTH
-
From 30” minimum to 192” maximum.
LENGTH
-
Swag sizes: center swag at approximately 18”, short point at approximately 14”.
SWAG & JABOTS COUNT
-
Only offered in outside mount, “L” brackets are included.
MEASURING/MOUNTING NOTES
RETURN SIZES
-
From 2” – 9” ordered in ½” increments.
AVAILABLE FABRICS
-
Available in all L3 fabrics except sheers.
LINING
-
Swags are lined with privacy lining.
-
Top treatments.
-
Interlining & dual lining are optional for swags.
-
Jabots are self-lined only.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
L3-SP22


L3-SP24

L3-SP29

L3-SP30

L3-SP32

L3-SP23
WIDTH
-
From 24” minimum to 192” maximum.
LENGTH
-
Center will measure approximately 16”, edges approximately 12”.
-
Offered in outside mount only, “L” brackets are included.
MEASURING/MOUNTING NOTES
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
-
Available in all L3 fabrics except sheers.
AVAILABLE FABRICS
LINING
-
Privacy lining is standard. Dual lining and interlining are optional.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
WELTING
-
Offered with ¼” welt at top.
SWOOP COUNT
-
1 swoop.
WIDTH
-
From 30” minimum to 192” maximum.
LENGTH
-
Only available in two lengths: 14” or 18”.
-
Offered in outside mount only, “L” brackets are included.
MEASURING/MOUNTING NOTES
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
-
Available in all L3 fabrics except sheers.
AVAILABLE FABRICS
LINING
-
Lined with privacy lining only.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
WELTING
-
Offered with ¼” welt at top.
PLEAT COUNT
-
L3-SP23 is made with pleat at center always and at each edge.

L3-SP25
MITERS
-
Mitered corners are offered as an option, factory will require drawing with exact angle and measurement.
-
Mitered corners are offered as an option, factory will require drawing with exact angle and measurement.
MITERS
WIDTH
-
From 30” minimum to 192” maximum.
LENGTH
-
Only available in two lengths: 14” or 18”.
-
Offered in outside mount only, “L” brackets are included.
MEASURING/MOUNTING NOTES
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
-
Available in all L3 fabrics except sheers.
AVAILABLE FABRICS
LINING
-
Lined with privacy lining only.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
WELTING
-
Offered with ¼” welt at top.
WIDTH
-
From 30” minimum to 192” maximum.
LENGTH
-
Only available in two lengths: 14” or 18”.
-
Offered in outside mount only, “L” brackets are included.
MEASURING/MOUNTING NOTES
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
-
Available in all L3 fabrics except sheers.
-
Straight part, shirred and belt are same fabric, contrast fabric for shirred and belt its an option.
AVAILABLE FABRICS
LINING
-
Lined with privacy lining only.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
WELTING
-
Offered with ¼” welt at top.

L3-SP26
WIDTH
-
From 30” minimum to 192” maximum.
LENGTH
-
Only available in two lengths: 14” or 18”.
-
Offered in outside mount only, “L” brackets are included.
MEASURING/MOUNTING NOTES
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
-
Available in all L3 fabrics except sheers.
-
Straight part, shirred and belt are same fabric, contrast fabric for shirred and belt its an option.
AVAILABLE FABRICS
LINING
-
Lined with privacy lining only.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
WELTING
-
Offered with ¼” welt at top.
WIDTH
-
From 32” minimum to 192” maximum.
LENGTH
-
Offered in 2 sizes
-
Big jabot 28” and straight portion 14”, small jabot 23” and straight portion 9”.
-
Big jabot 36” and straight portion 18”, small jabot 26” and straight portion 13”.
-
-
Offered in outside mount only, “L” brackets are included.
MEASURING/MOUNTING NOTES
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
-
Available in all L3 fabrics except sheers.
-
Straight part, shirred and belt are same fabric, contrast fabric for shirred and belt its an option.
AVAILABLE FABRICS
LINING
-
Lined with self-lining. Dual lining and interlining are an option.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
WELTING
-
Offered with ¼” welt at top.
MITERS
-
Mitered corners are offered as an option, factory will require drawing with exact angle and measurement.
-
Mitered corners are offered as an option, factory will require drawing with exact angle and measurement.
MITERS
WIDTH
-
From 36” minimum to 108” maximum.
LENGTH
-
Offered in 2 sizes
-
Edge length 30”, center part 13½”.
-
Edge length 32”, center part 15½” .
-
-
Offered in outside mount only, “L” brackets are included.
MEASURING/MOUNTING NOTES
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
-
Available in all L3 fabrics except sheers.
-
Straight part, shirred and belt are same fabric, contrast fabric for shirred and belt its an option.
AVAILABLE FABRICS
LINING
-
Lined with self-lining. Dual lining and interlining are an option.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
WELTING
-
Offered with ¼” welt at top.
-
Offered with ¼” welt at top.
WIDTH
-
From 24” minimum to 192” maximum.
LENGTH
-
Offered in 2 lengths only: 14” or 18”.
-
Center part will measure 3” to 5” longer than length ordered.
-
Offered in outside mount only, “L” brackets are included.
MEASURING/MOUNTING NOTES
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
-
Available in all L3 fabrics except sheers.
AVAILABLE FABRICS
LINING
-
Lined with self-lining. Dual lining and interlining are an option.
DECORATIVE TRIM
-
Decorative trims are offered as an option for bottom edge only.
2” BANDING
-
2” banding is offered as an option, choose on sides, bottom or side and bottom.
WELTING
-
Decorative trims are offered as an option for bottom edge only.
DECORATIVE TRIM
-
Lined with privacy lining only.
LINING
-
Available in all L3 fabrics except sheers.
AVAILABLE FABRICS
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
MEASURING/MOUNTING NOTES
-
Only offered in outside mount, “L” brackets are included.
PLEAT COUNT
-
Only available in two lengths: 14” or 18”.
LENGTH
-
From 30” minimum to 192” maximum.
WIDTH
WELTING
-
Offered with ¼” welt at top.
MITERS
-
Mitered corners are offered as an option, factory will require drawing with exact angle and measurement.
-
Decorative trims are offered as an option for bottom edge only.
DECORATIVE TRIM
-
Lined with privacy lining only.
LINING
-
Available in all L3 fabrics except sheers.
AVAILABLE FABRICS
-
From 2” – 9” ordered in ½” increments.
RETURN SIZES
MEASURING/MOUNTING NOTES
-
Only offered in outside mount, “L” brackets are included.
PLEAT COUNT
-
Offered in 2 lengths only: 14” or 18”.
-
End of pleat measures approximately 3” less than pleat center.
HEIGHTS
-
From 24” minimum to 192” maximum.
WIDTH
WELTING
-
Offered with ¼” welt at top.
MITERS
-
Mitered corners are offered as an option, factory will require drawing with exact angle and measurement.