Roman Shades

CLASSIC
CLASSIC - L3-RM01
  • Allows for sophisticated and modern appearance.

  • Shade differentiates Classic from other shade styles.

  • Please note that back pockets will slightly interrupt the pattern of the fabric.

  • Banded trim available as an option, standard size is 2”.

FRONT PLEAT
HOBBLED
RELAXED
FLAT FOLD
FLAT FOLD - L3-RM02
  • No horizontal seam on this style; perfect choice when using fabrics with large patterns because of support rods that allow it to fold neater and lie flatter than other flat shades.

  • Banded trim available as an option, standard size is 2”.

  • Not available with Cordless option.

  • A slight threading may be noticed on the face of the shade, due to hand sewn cord rings.

HOBBLED - L3-RM03
  • Fabric falls in soft folds at 6” intervals. Each fold has a hidden rod on the back for additional support.

  • The fabric design may be interrupted when folded, take this into consideration when picking a fabric for your Hobbled Shade.

  • Banded trim available as an option, standard size is 2”.

FRONT PLEAT - L3-RM04
  • Enhances every pleat on the front of the shade.

  • Maximum width 48”.

  • Banded trim available as an option, standard size is 2”.

RELAXED - L3-RM05  
  • Shade lies flat when lowered and will always have a gentle, decorative, inverted arch at the bottom.

  • All stitching to attach the cord rings are hand sewn into the fabric. A slight threading may be noticed on the front of the shade.

  • Outside mount only.

  • Manual adjustment may be needed to achieve the desired arch at the bottom.

  • TDBU & cordless not available for this style.

  • Trims, banding & accessories not available on this type of shade.

  • Minimum width 24”.

  • NOTE: Relaxed Roman Shades are more often used in a decorative setting, not recommended for frequent use.

TOP DOWN BOTTOM UP
  • Maximum width & length: width: 120”, length: 120”

  • Adjustable 1-2” only on top down bottom up option.

  • Valance included.

  • Inside mount - return not included.

  • ¼” deduction will be taken at the factory.

  • Outside mount.

  • Headrail will be 1” wider than shade for outside mount with cords forward only.

  • Relaxed style not available.

  • Top-down is controlled by the left cord/bottom-up is controlled by the right cord.

  • NOTE:  white cords used only.

2 ON 1 HEADRAIL
  • Minimum total width: 48” 

  • Chain control option/cord lock.

  • Cords back - valance not included.

  • Cords forward - valance included.

  • Standard gap between Roman Shades: ¼”.

  • Standard gap between Roman Shades: ¼”.

UP-ENDED HEADRAIL
  • Headrail: 1¼”H x ¾”D

  • Chain control option, top down bottom up; cordless or motorized lift systems not available.

  • 2” Screws are included for outside/inside mount. “L” brackets not available.

  • NOTE: headrail may be turned up to 90 degrees to fit slim spaces

MOTORIZED
  • Maximum width & length width: 84”, length: 84”

  • Minimum width & length width: 30”, length: 18”

SHEER SHADES
  • Only available in flat fold & relaxed style.

  • Sheer shades are unlined.

  • Flat Fold style is not available in cordless.

  • Relaxed style is not available in TDBU & cordless.

LIFT SYSTEM OPTIONS

CORDS FORWARD
  • Maximum width & length: width: 120”, length: 120”

  • Cords back - valance not included (standard); available as an option.

  • Return not included.

  • ¼” deduction will be taken at the factory.

  • Cords forward - valance included.

  • Clear tassels.

  • Cords: color will be matched as closely as possible.

  • Whenever L3 roman shades are ordered with front cords, a grommet hole is placed below the control. The function of this, is to pull the cord through the hole, so it will not be seen from the front of the shade. A valance is provided, on all front controls, to cover this area.

CHAIN CONTROL OPTION INSIDE MOUNT
  • Maximum width & length width: 120”, length: 120”

  • Minimum length: 18”

  • Cords back - valance not included (standard); available as an option.

  • Cords forward - valance included.

  • ¼” deduction will be taken at the factory.

  • Head board width: 3”.

CHAIN CONTROL OPTION OUTSIDE MOUNT
  • Cords back valance not included; available as an option.

  • Outside mount  / cords back: 6” returns.

  • Inside mount - no returns provided.

  • Shade will be exact net measurement provided.

  • Headrail will be 1” wider than shade for outside mount with cords forward only.

  • 3” head board used on all sizes.

  • Minimum: 18”L

  • Maximum: 120”W, 120”L

CORDLESS
  • Maximum width & length: width: 84”, length: 84”

  • Minimum width & length: width: 24”, length: 18”

  • Outside mount / 6” returns.

  • Headrail will be 1” wider than shade for outside mount with cords forward only.

  • Inside mount - ¼” deduction will be taken at the factory.

  • NOTE: Available for Hobbled, Classic & Front Pleat, styles in select fabrics and linings only.

Measure the outside perimeter of the window frame.

HOW TO MEASURE FOR ROMAN SHADES

INSIDE MOUNT

For width:
Take measurements from the top, center & bottom of the window frame, always staying on the inside edge.

For length:
Take measurements from the left, center & right of the window frame, always staying on the outside edge .

For width & length:
Recommendation: always add 2” – 4” to your total measurement (width & height) to make sure light does not show from behind the Roman Shade.

OUTSIDE MOUNT
  • Standard cords on back with standard white tassels.

  • Shades with back cords come without valances.

  • Headrail size: 1” – ½” depth x ¾” height.

  • Headrail wrapping: matching fabric.

  • Shade will be located on the front of the headrail.

  • Controls concealed behind the shade.

  • A valance can be added as an option for back cords shades.

  • White privacy lining for all Roman Shades.

  • Lining is not available for sheer fabrics.

  • Color coordinating cords & clear tassels will only be available for front cord shades.

  • All shades over 96” width will have a pulley control.

  • Shades are made from bottom to top, and patterns will be matched from the bottom of the shade to the top.

STANDARD SPECIFICATIONS FOR ROMAN SHADES

SIZE LIMITATIONS
SIZE LIMITATIONS
SIZE LIMITATIONS
SIZE LIMITATIONS
SIZE LIMITATIONS
Tel: 844-521-8048

© 2016 BY LEVEL 3 INDUSTRIES. ALL RIGHTS RESERVED.